Step 1 - Make sure the device is fully charged.
Attached the charger cable with the magnetic plug to the device.
Plug your device into any USB port to charge. The on/off switch will glow red when charging and green when fully charged.
Step 2 - Secure the unit onto the soft velcro strap.
Slide the velcro strap through the device and secure under the velcro tab. Loop it back on itself through the buckle and slide your hand into the loop. The application nozzle should sit directly on the point of the pain.
Secure the unit with the velcro side of the strap wrapping the strap over the device.
Step 3 - Turn your device on by pressing and holding the button.
Cycle through the modes by pressing the button to your chosen mode. Raise the arm and rest during the treatment.
After approximately 10 minutes the built in timer will turn the device off.
The TheraPulse unit provides signals direct to the point of pain. Usage is painless and side effect free.
The device helps to reduce pain for up to 4 hours after each session.
It is important to continue the treatment on a daily basis for a few weeks for the best results and find the mode which works for you. Most users experience benefits within a number of days of starting to use the device.
